 |
HIGHLIGHT IIA (Strong)
- Available from 1000 to 7000 watts
- Easy access on three sides provided by removable doors
- "Cold" electorformed reflectors
- Automatic DC lamp ignition is standard
- Choice of High Reactance or Switching Power Supplies
- Standard power distribution panel is expandable
- Can be adapted to fit all standard 35mm film projectors
|
 |
SUPER LUMEX (Strong)
- Arguably the popular lamphouse ever made
- Suitable for operation from 700 to 2500 Watts
- 11-inch "Cold" electorformed reflector provides unparalleled light output
- High Energy Automatic ignition standard
- Available with High Reactance or Switching power supplies
|
 |
ULTRA 80 (Strong)
- Suitable for operation from up to 7000 Watts
- 15-inch "Cold" electorformed reflector combines high light output with uniform field
- High Energy Automatic ignition standard
- Available with High Reactance or Switching power supplies
|
 |
CINEMCANICCA CC7040H
- Can use Xenon Lamps from 1600W to 10,000W
- Built In IREM Rectifier and Ingiter
- Beam Spreader for 70mm is available
- Features rack space for sound and automation
- Can be supplied with a huge variety of options.
|
 |
LAMPHOUSES
- Various models to choose from
- Different models allow use of Xenon Lamps from 500W to 8000W
- Beam Spreader for 70mm is available
- High efficiency blowers and exhaust options
- Can be supplied with a huge variety of options.
|
 |
XLC Console (MiT)
- Steel uni-body construction, rugged textured powder coat finish
- Narrow, 21in [533.4mm] width footprint
- Lamp is replaceable from either side of the console, with no tools required
- Dual hour meters, one for cumulative system hours and one re-settable meter for lamp hours
- Air intake from the rear of the console permits use of an air filter (if desired) and ducted intake lowers console noise level
- High-efficiency linear power supply using all 120A (rms), SCRs and ripple-reducing filters on the DC output
- 6RU of rack space from the operator side or rear of the console
- Concealed internal wiring, routing via ducts and channels to minimize cable exposure
- 14in [355.6mm] nickel reflector for all wattages, multi-layer dichroic coatings with optional secondary IR/UV filter
- Motorized lamp adjustment with defeat switch standard
- Downward tilt up to 13 degree
- Anode cooling ducts for all wattages
- Four configurations, 2-3kW and 4-7kW for 230V or 415V, 50/60Hz
- Designed for HTP lamps (HS with optional rear adaptor)
- Continuous rated douser, configurable for left or right-side operation
- Mounting provisions for optional 4" locking casters
|
< < Back
|
